Audio-Technica AT2035

Artikkelnummer 1026544

<b>AT2035</b> er designet for både hjemme-, prosjekt- og profesjonelle studio, og leverer eksepsjonell detaljert lyd og lav egenstøy. Mikrofonen er utstyrt med 80Hz high-pass filter og et 10 dB dempeledd, og takler høye lydkilder med letthet. Sammen med sin solide konstruksjon og gode spesifikasjoner har <b>AT2035</b> en eksepsjonell jevn kvalitet fra mikrofon til mikrofon. En mikrofonpose og solid sjokkabsorberende oppheng følger med.

Bestillingsvare

Betal direkte, faktura eller delbetaling - Lagre kort og bankkonto - Enkelt og trygt - Klarna kjøperbeskyttelse

Kr 1666/stk

Kjøpe

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Includes custom shock mount & protective pouch

Spesifikasjoner

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Weight: 403 g (14.2 oz)
Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

Audio-Technica AT2035

Tilbehør

K&M 210/4B Microphone Stand

Hercules DG107B Podcast Arm

AMP PM-4/15

sE Electronics RF PRO

sE Electronics METAL Pop Filter

sE Electronics Dual Pop Filter

Ernie Ball 6391 Braided Microphone Cable, 4.5 Meter

K&M 23956

AMP PM-4/25

Nomad NMS-6606