Audio-Technica AT4050

Artikkelnummer 1016349

Audio-Technica Mikrofon Kondensator Nyre Studio m/AT8449 <br/><br/> AT-4050SM er en multi-karakteristikk kondensatormikrofon m/ AT8430 stativadapter. Den fremviser en bemerkelsesverdig kombinasjon av høy-SPL kapasitet og luftig/transparent diskant- og mellomtonekombinert med potente lavfrekvensegenskaper.

Bestillingsvare

Betal direkte, faktura eller delbetaling - Lagre kort og bankkonto - Enkelt og trygt - Klarna kjøperbeskyttelse

Kr 8699/stk

Kjøpe

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050SM exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. Supplied with AT8449 shockmount. Also available as the AT4050SC with the AT8430 isolation stand clamp.

Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.

Audio-Technica's AT4050SM. For performance that legends are made of.

Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
Three switchable polar patterns: omni, cardioid, figure-of-eight
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
State-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards
Switchable 80 Hz hi-pass filter and 10 dB pad
Custom shock mount provides superior isolation
Also available as the AT4050SC with the AT8430 isolation stand clamp

Specification

Element: Externally-polarized (DC bias) condenser
Frequency Response: 20-18,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 132 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.2 mA typical
Weight: 18.0 oz (510 g)
Dimensions: 7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Accessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case

Audio-Technica AT4050

Tilbehør

K&M 210/4B Microphone Stand

Hercules DG107B Podcast Arm

AMP PM-4/15

sE Electronics RF PRO

sE Electronics METAL Pop Filter

sE Electronics Dual Pop Filter

Ernie Ball 6391 Braided Microphone Cable, 4.5 Meter

K&M 23956

AMP PM-4/25

Nomad NMS-6606