Acon Restoration Suite 2

Artikkelnummer 1057498

Noise Reduction Plug-ins DeNoiser, DeHum, DeClick, DeClip

Direct Download

Betal direkte, faktura eller delbetaling - Lagre kort og bankkonto - Enkelt og trygt - Klarna kjøperbeskyttelse

Kr 1155/stk

Kr 888/stk Kampanjepris 15 dager, 7t igjen

ACON BlackFriday 2024! Up to 71% Off until December 6

Advanced algorithms reduce stationary noise efficiently with minimal impact on the wanted material
Transient detection ensures that transients remain untouched throughout the noise reduction process
Effective temporal smoothing reduces “musical noise” artifacts
Adaptive estimation of noise profile or estimation based on noise only
Target broadband and tonal noise or optionally broadband only
Graphical representation of input frequency spectrum and the noise profile
Frequency emphasis filter
- High and low shelving filters with variable slopes (-3 to -96 dB / octave)
- High and low peak filters with adjustable bandwidth (0.1 to 3.0 octaves)
- Graphical representation of frequency response
- Editing of filter settings through handles in the frequency response curve
Residual signal mode allows you to listen to the removed signal

Remove hum and buzz with minimal loss of the wanted signal
Novel sinusoidal re-synthesis algorithm (preserves wanted signal to a much larger extent) or conventional notch filter mode
Adaptive mode allows removal of hum signals with a fluctuating fundamental frequency
Automatically removes up to 16 harmonics
Optionally to targets only odd harmonics
High resolution spectrum analysis of the input signal
Visual indication of the estimated fundamental frequency as well as the harmonics
Residual signal mode allows you to listen to the removed signal

Seperate detection and restoration of clicks, crackle and plosives
Very accurate detection of click start time and duration ensures minimal impact on the wanted material
Visual curve meters show the clicks and crackle removal rates
Residual signal mode allows you to listen to the removed signal

Reconstructs peaks distorted by analog or digital clipping
Separately adjustable upper and lower threshold values
Optional upper and lower threshold lock simplifies the workflow in the case of symmetrical clipping
Graphical representation of the input and output level histograms makes it easy to set the threshold values and monitor the restoration process visually
Threshold values can be adjusted directly from the level histograms by dragging upper and lower threshold handles