PSP stereoController2 is designed to control, adjust, and rescue incorrectly recorded dual channel stereo tracks, or process them for specialized applications or cool sonic tricks.
-
High quality signal processing algorithms
-
Up to 2 ms of delay - can repair up to ~68 cm / 2 ft of distance mismatch between mics
-
Width expansion up to 400% for narrowly recorded stereo tracks
-
Master gain control up to ±12dB
-
Optional dedicated width and gain controls for Low and/or High frequencies
-
Low and High band gain control up to ±6dB
-
Stability (sides) balance control without affecting the center content localization
-
Center control to adjust the panorama location of the center content
-
Standard balance control of channels
-
M-S decoder
-
Output monitoring and solo capability for Mid and Side signals
-
Channel swap
-
Polarity switches for both channels
-
Correlation meter
-
Balance meter
-
Dedicated sections for Low and High frequency level and width control
-
Parameter filtering for smooth and click-free parameter adjustment
-
Support for sample rates up to 384 kHz
PSP stereoController2 can be used in various situations:
-
unbalanced stereo image due to level difference between channels, e.g. in dual microphone stereo recordings
-
slight time alignment shift between channels
-
a track’s stereo image is too narrow or too wide for the mix
-
when the center instrument seems to be shifted to one side
-
virtually emulating an instrument’s location in the soundfield via combined level and delay panning
-
one or both channels have reversed polarity, or the channels are swapped
-
decoding a Mid-Side (M-S) encoded track into L/R stereo
-
reducing the stereo width of low frequencies, or making them mono, for proper speaker or subwoofer replay or for reliably cutting vinyl
-
widening stereo width of high frequencies for more ‘airy’ harmonics and spaciousness
-
fine adjustment of stereo imaging during the mastering process